newest products Vision Spinner II 1600mAh Battery The Spinner 2 has a lot of improvements from the first generation. We have combined all the features and advantages of the first generation but at the same time created a totally new unique Spinner 2.
This is new version of vision spinner battery,it's new upgraded from visionn spinner and stable PCB control Board .More Comfortable and ergonomic spin Dial for adjusting the Volts,big capacity for 1600mah which even more power ful than the first version.It also have longer Lasting Life span due to the New upgraded PCB circuitry And Battery Cell.
Instructions:
1. Turn on/off the battery
* The battery is turned on/off by pressing the button five times in two seconds.
* When the battery is off, the button flashes three times in mixed color to indicate that battery is
activated after pressing the button five times in two seconds.
* When the battery is on, the button flashes three times in mixed color to indicate that battery is off after pressing the button five times in two second.
2. Set the voltage output
* Spinner II is capable of outputting voltage from 3 Rigid flex PCB.3v to 4.8v
* The bottom scale indicates the position of voltage output level
* Rotate the bottom spin to align the red line with the bottom scale to arrive the voltage output level
as marked in number
*The red line on bottom spin can stay at any position along the scale between 3.3v and 4.8v to fine-tune your voltage output,despite the four locking position at 3.3v, 3.8v, 4.3v and 4.8v.
*Please be aware that the red line moves between 3.3v and 4.8v along the scale and do not push the red line on bottom spin to go over the 3.3v clockwise and 4.8v counter-clockwise; it may damage the battery if being pushed forcefully!
3. Power indication
* Spinner II could display three colors from the button to indicate the battery usage level
* If the button displays WHITE color being pressed when battery is on flex PCB, it indicates a remaining 60%-100% battery power
* If the button displays BLUE color being pressed when battery is on, it indicates a remaining 30%-60% battery power
* If the button displays ORANGE color being pressed when battery is on, it indicates a remaining 0%-30% battery power ( time to charge the battery!)
* The button flashes fifteen times in mixed color to indicate that there is no power at all left in battery
and it can no longer function without being properly charged!!!!
4. Other important facts
* Short circuit protection - when battery is on, in case of a short circuit which usually happens if the user operates wrongly during installing a clearomizer onto the battery or connecting USB charger to the battery, the button flashes three times and stop working temporarily until the conditions causing short circuit are removed
* Working time protection - when battery is on, in case of pressing the button non-stop for more than eight seconds, the button flashes five times and shut down the output instantly
* Charging time - Spinner II, for its large capacity of 1600mA, requires about 5-6 hours to be fully.
You can found this product from here ：http://www.ronpcb.com/
Welcome to your inquiry
Related Links
留言列表
